Arcane

After your purchase please make sure to follow this Pre Requirements Video, otherwise cheats wont work. You can download the MadChad support tool as seen on the Video HERE.

Pre Requirements Video:

Injection Video:

🧰 Preparation Before Key Activation

Before activating your key, make sure your system is properly prepared.

🚫 Mandatory Requirements (IMPORTANT)

Before running the loader, you MUST:

• ❌ Remove all antiviruses

• ❌ Disable Windows Defender

• ❌ Disable Windows SmartScreen

• ❌ Delete FACEIT (CS:GO anti-cheat)

• ❌ Delete Vanguard (Valorant anti-cheat)

⚠️ These protections run at kernel level and will block the software.

---

🎮 NVIDIA Graphics Cards

If you are using an NVIDIA GPU:

• Install NVIDIA App

• Complete NVIDIA account authorization

• Install the latest NVIDIA video driver

• Enable NVIDIA In-Game Overlay

⚠️ The software will NOT work if the NVIDIA overlay is disabled.

---

🎮 AMD / Other Graphics Cards

If you are using AMD or any other GPU:

• Download SteelSeries GG

• Open SteelSeries Settings

• Go to Settings → Moments → Capture and Sound

• ❌ Disable Allow Moments to capture while gaming

• Go to Overlay and Notifications

  • ❌ Disable Display game overlays

• Enable Sonar in General Settings

• Go to SONAR

  • Set a shortcut key for Sonar Overlay (example: Master Volume Up)

• ✅ Press the Sonar shortcut before launching the loader every time

---

⚙️ BIOS & System Requirements

• Disable Intel Rapid Storage Technology (IRST) in BIOS

• Install required dependency → https://aka.ms/vs/17/release/vc_redist.x64.exe

---

🚀 Starting Instructions

Follow these steps carefully:

• Download the loader and place it anywhere -

• Run the loader as Administrator

• If the loader updates, close it and run it again

• Enter your license key and press Enter

  • To paste the key: Right-click (RMB) inside the CMD loader

• If prompted:

  • Clean traces → Press Yes if needed

  • HWID Spoofer → Press Yes if needed

• Loader will close automatically after successful loading

• Launch the game normally

• The menu will appear automatically

• Open / close the menu with HOME or INSERT

• Unload the software with END

✅ Setup complete. You’re ready to play.

---

🛠️ Errors & Troubleshooting

---

❗ Loader Closes Without Error

• Install required dependency → https://aka.ms/vs/17/release/vc_redist.x64.exe

---

❗ Menu Visible but Not Clickable

• Run the overlay as Administrator

• Follow overlay setup instructions above

---

❗ Windows 10 – “Make sure all antiviruses are disabled”

• Uninstall all third-party antiviruses

• Disable Real-Time Protection

• Disable Windows SmartScreen

---

❗ Windows 11 – “Make sure all antiviruses are disabled”

• Download both files → https://disk.yandex.ru/d/5slbv4S2AL1M0w

• Run Turn_ON

  • Accept registry changes

  • Restart PC

• Run Turn_OFF

  • Accept registry changes

  • Restart PC

• If still not fixed:

  • Ensure antivirus is removed

  • Ensure real-time protection is disabled

---

❗ Menu Is Visible but Cannot Be Clicked

• Run Steam NOT as Administrator

• Disable all third-party overlays

  • ✅ Leave only NVIDIA or AMD overlay

---

❗ Menus Disappear / Visuals Not Working

• If the game was updated, wait for a product update

• Verify game file integrity (full reinstall is recommended)

• If the issue persists, contact support

---

❗ Menu Does Not Open / Not Clickable on First Launch

• Start Steam WITHOUT admin rights (Steam version)

• Disable EA App Overlay (EA version)

---

❗ AES Instruction Set Is Not Supported

• Your CPU does NOT support AES

• ❌ This cannot be fixed

• Contact support for a refund

---

❗ Please Enable Intel VT-X in BIOS

• Enter BIOS

• Enable Intel Virtualization Technology / VT-X

---

❗ Please Enable AMD-V in BIOS

• Enter BIOS

• Enable AMD-V or SVM Mode

---

❗ Please Disable Secure Boot

• Enter BIOS

• Disable Secure Boot

---

❗ Unsupported Firmware

• Convert OS disk to GPT format

• Use:

  • Windows mbr2gpt tool

  • or any disk management utility

---

❗ Secure Boot Keys Are Incorrect

• Enter BIOS

• Enable Secure Boot

• Save and reboot

• Open PowerShell and run:

  Confirm-SecureBootUEFI

• If result is True:

  • Reboot

  • Enter BIOS again

  • Disable Secure Boot

---

❗ VMX / SVM Is Not Supported

• Go to Control Panel → Programs and Features

• Click Turn Windows features on or off

• ❌ Disable:

  • Virtual Machine Platform

  • Hyper-V

• If still not fixed:

  • Open CMD as Administrator

  • Run:

    bcdedit /set hypervisorlaunchtype off

  • Reboot PC

---

❗ Incorrect HWID

• Open CMD as Administrator

• Run the following commands one by one:

  wmic diskdrive get Caption, SerialNumber
  wmic baseboard get SerialNumber

• If any command fails:

  • Something is wrong with the system

  • Reinstall Windows and try again

---

🆘 Still Having Issues?

If you encounter any other error:

• Send a screenshot to website support (bottom-right corner)

• Download AnyDesk

• Send AnyDesk ID to support chat